UNB ECE4253 Digital Communications
Department of Electrical and Computer Engineering - University of New Brunswick, Fredericton, NB, Canada

QR Code Symbol Generating Tool (Version 1)

This online tool encodes an input string into a QR Code symbol as defined by the ISO/IEC 18004 standard.

QR Code symbols are two dimensional bar codes arranged as distinctive square matrices with various dimensions (versions) according to their data capacity. The QR Code symbol produced here is a Version 1 (21 × 21) matrix carrying a total of twenty six information bytes.

A QR Code symbol incorporates many elements of a digital communications system including timing reference, scrambling, interleaving, and the use of powerful error control codes. Reed Solomon GF(256) error correction is used on the data such that this 26 byte symbol can hold from 9 to 19 data bytes depending on the level of Error Control Coding (ECC) chosen. The formatting information within each QR code symbol is protected using a BCH (15,5) code; moreover, this information is included twice in the symbol for further redundancy.

QR Code Version 1

Q R   C o d e   V e r s i o n   1

The above text has 17 characters.

Text Message:

Discussion | View Bits | Omit Mask | Omit Content | MATLAB

ECC LEVEL:      DATA MASK:      Compression

Version 1 26 BytesTextCompression
L (01) 719172541
M (00)1016142034
Q (11)1313111627
H (10)17 9 71017

SELECT SYMBOL SIZE: (21 × 21)  |  (25 × 25)  |  (29 × 29)

2024-07-14 18:08:19 ADT
Last Updated: 2011-09-01
Richard Tervo [ tervo@unb.ca ] Back to the course homepage...